TVFixings.co.uk - TV Brackets

B-Tech Viewlogic Plus + (Up to 42") LCD Screen Wall Mount - BT7535

Fri, 12 Dec 2008 10:39:52 +0000

Designed for LCD / TFT Screens up to 42 " with either 200mm X 100mm, 200mm X 100mm, 100mm x 100mm or 75mm x 75mm VESA® fixings.

Double articulated arm for maximum swivel. Simple installation - all mounting hardware included.

B-Tech Viewlogic Plus + (Up to 32") LCD Screen Wall Mount - BT7514

Fri, 12 Dec 2008 10:34:36 +0000

Designed for LCD / TFT Screens up to 32 " with either 200mm X 100mm, 100mm x 100mm or 75mm x 75mm VESA® fixings.

Tilts 15º up, down or sideways. Pivots at screen and wall. Saucer rotates a full 360º , displays screen in landscape or portrait style. Max Load 25Kg.

B-Tech LCD Screen Wall Mount with Articulated Arm - BT7513

Fri, 12 Dec 2008 10:30:39 +0000

This mount is designed for LCD VESA® Standard Screens with a screen size from 10" to 23" and weight up to 15Kg. The BT7513 has a twin arm design that allows for full flexibility when mounting your screen - it can mount the screen flat to the wall or extend out to up to 450mm from the wall. There are three swivel points - one at the wall for 180º, one in the middle of 240º and one at the screen of 240º - this makes it possible to mount your screen in the most inconvenient of locations such as in corners. The BT7513 also has a tilt function of up to +/- 17º.

A simple two piece installation process is all it takes to mount your screen to the wall (all mounting hardware is included). This bracket can be mounted on single wood studs or concrete / brick walls (mounting to metal studs requires special metal stud fasteners which are not supplied).

B-Tech LCD TV "Low Profile" Wall Mount - BT7532

Fri, 12 Dec 2008 10:25:35 +0000

Only 17mm from the wall - our lowest profile bracket from B-Tech. Designed for LCD screens with VESA® standard mounting patterns: 200mm x 200mm, 200mm x 100mm, 100mm x 100mm & 75mm x 75mm. Suitable for screens up to 40kg (88lbs).

Low profile design mounts screen only 17mm (2/3") from wall. Quick easy and secure 'Hook On' installation and all mounting hardware included. A simple two piece installation process is all it takes to mount your screen to the wall (all mounting hardware is included). This bracket can be mounted on single wood studs or concrete / brick walls or with the appropriate fixings (not supplied) on Plaster Boards walls.

B-Tech AV Component Shelf - BT7077

Fri, 12 Dec 2008 10:20:16 +0000

The B-Tech BT7087 Glass support shelf is ideal for wall-mounting a DVD, NTL or Sky Box below or above a wall mounted TV. This British designed wall mounted shelf uses 10mm toughened safety glass and is able to support equipment weighing up to 10kg(22lbs)

The BT7087 can be used as a stand-alone shelf or it can be used in conjunction with the BT7070 cable management system. When used with the cable management system, cables can be fed directly to the back of the shelf

Once secured to the wall, the steel wall-plate is covered be a attractive black housing, this hides the wall fixings.

Specification as per BT7087 but without glass shelf and best suited for equipment up to 430mm wide or over x 260mm deep.

B-Tech AV Component Glass Shelf - BT7087

Fri, 12 Dec 2008 10:16:36 +0000

The B-Tech BT7087 Glass support shelf is ideal for wall-mounting a DVD, NTL or Sky Box below or above a wall mounted TV. This British designed wall mounted shelf uses 10mm toughened safety glass and is able to support equipment weighing up to 10kg(22lbs)

The BT7087 can be used as a stand-alone shelf or it can be used in conjunction with the BT7070 cable management system. When used with the cable management system, cables can be fed directly to the back of the shelf

Once secured to the wall, the steel wall-plate is covered be a attractive black housing, this hides the wall fixings.

Best suited for equipment up to 430mm wide or over x 260mm deep.

HDF100-1 - Pull out Tilt & Turn Arm for 12"-23" Screens

Wed, 19 Nov 2008 15:44:27 +0000

Another in the range from Fronar - This British Made LCD/Flat Pull out Tilt and Turn Arm with horizontal movement Left/right) and Tilt of up to 15 degrees. Manufactured in the UK by Fronnar. Its ideal for smaller sizes TV screens up to 23" and with VESA mounting points on the back that are 75mm x 75mm or 100mm x 100mm - be sure to check the "Image Gallery" for some excellent illustrations of the bracket and it shown in situ.

The HDF100-1 TV Arm comes with all the fixings you need to mount your TV to the bracket and the bracket to the wall. Simple, clear instructions are included. Free Delivery

Colour: Graphite/Black

HDF-200 Black Tilt/Turn LCD Bracket

Wed, 19 Nov 2008 14:58:22 +0000

This British Made LCD/Flat Panel Arm with horizontal movement Left/right) and Tilt of up to 15degrees. Manufactured in the UK by Fronnar. Its ideal for smaller sizes TV screens up to 32" and with VESA mounting points on the back that are 75mm x 75mm or 100mm x 100mm, 100mm x 200mm. - Be sure to check the "Image Gallery" for some excellent illustrations of the bracket and it shown in situ.

The HDF-200 bracket comes with all the fixings you need to mount your TV to the bracket and the bracket to the wall. Simple, clear instructions are included. Free Delivery

Colour: Graphite/Black

Pack Includes: -

1 X Ball Joint Spacer
1 X Plastic Spacer
4 X M4 x 12 Socket Flange Dome Screw
1 X 2.5 Short Arm Wrench
1 X Spring Washer
1 X M6 x 20 Socket Dome Head Screw
1 X 4mm Short Arm Wrench
4 X M6 x 40 Pan Head Wood Screw
4 X Rawl Plugs

HDF-100 Black Tilt/Turn Bracket

Wed, 19 Nov 2008 14:37:14 +0000

This British Made LCD/Flat Panel Arm with horizontal movement Left/right) and Tilt of up to 15degrees. Manufactured in the UK by Fronnar. Its ideal for smaller sizes TV screens up to 23" and with VESA mounting points on the back that are 75mm x 75mm or 100mm x 100mm. - Be sure to check the "Image Gallery" for some excellent illustrations of the bracket and it shown in situ.

The HDF-100 bracket comes with all the fixings you need to mount your TV to the bracket and the bracket to the wall. Simple, clear instructions are included. Free Delivery

Colour: Graphite/Black

Pack Includes: -

1 X Ball Joint Spacer
1 X Plastic Spacer
4 X M4 x 12 Socket Flange Dome Screw
1 X 2.5 Short Arm Wrench
1 X Spring Washer
1 X M6 x 20 Socket Dome Head Screw
1 X 4mm Short Arm Wrench
4 X M6 x 40 Pan Head Wood Screw
4 X Rawl Plugs

HDN-200 Flat on the Wall LCD TV Bracket

Wed, 19 Nov 2008 13:20:39 +0000

This British Made LCD/Flat Panel Mount from Fronnar is ideal for smaller sizes TV screens up to 23" and with VESA mounting points on the back that are 75mm x 75mm, 100mm x 100mm or 200mm x 100mm. - Be sure to check the "Image Gallery" for some excellent illustrations of the bracket and it shown in situ.

The HDN-200 bracket is super compact, comes with all the fixings you need to mount your TV to the bracket and the bracket to the wall. Simple, clear instructions are included. Free Delivery

When mounted your TV is only 2cm from the wall so you get a really neat tight fit. Colour: Graphite/Black

Pack Contents for the HDN-200

1 X Wall Plate
1 X 75/100/200 VESA Fitting
4 X M4 X 12 Socket Flange Dome Screw
6 X M6 X 40 Wood Screw
6 X Rawl Plugs to Suit
1 X 2.5 Short Arm Wrench

HDN-100 Flat on the Wall Mount

Wed, 19 Nov 2008 12:45:49 +0000

This British Made LCD/Flat Panel Mount from Fronnar is ideal for smaller sizes TV screens up to 23" and with VESA mounting points on the back that are 75mm x 75mm or 100mm x 100mm. - Be sure to check the "Image Gallery" for some excellent illustrations of the bracket and it shown in situ.

The HDN-100 bracket is super compact, comes with all the fixings you need to mount your TV to the bracket and the bracket to the wall. Simple, clear instructions are included. Free Delivery

When mounted your TV is only 2cm from the wall so you get a really neat tight fit. Colour: Graphite/Black

Pack Contents for the HDN-100

1 X Wall Plate
1 X 75/100 VESA Fitting
4 X M4 X 12 Socket Flange Dome Screw
6 X M6 X 40 Wood Screw
6 X Rawl Plugs to Suit
1 X 2.5 Short Arm Wrench

Pull out Tilt & Turn Wall Mount (MA2740)

Tue, 18 Nov 2008 15:39:51 +0000

Attractive, compact Pull Out "Tilt & Turn" Wall mount for LCD Flat Screen Tv's up to 27" and weighing no more than 17Kg. This TV arm is Black, made from high quality alloy for added strength and durability and comes with all the fixings to fit the TV to the bracket and the bracket to the wall. The rear plate thats affixes to the wall incorporates a spirit level so there is no excuse from not getting the bracket on the wall square.

Allows you to extend the TV up to 25.2cm from the wall.

Includes full instructions and a 5 year warranty

FREE Gold Plated HDMI coaxial cable - 2m

Fri, 26 Sep 2008 16:30:52 +0100

FREE CABLE - Spend over £10 and claim this HDMI cable absolutely FREE! - Please Note: Strictly one per person !!

Over orders will be accepted by the website but I'm afraid we'll still only send one. These cables retail at £7.99 so we're sure you'll understand why we can only send you one - PLEASE MAKE SURE YOU ADD THE CABLE TO YOUR ORDER OR IT WON'T BE SENT - THANKS!!-

This is a 2M Gold Plated HDMI coaxial cable that is V1.3 compliant. The cable is a 18Pin Male to 18Pin Male (standard configuration) and is ideal for connecting your HD TV to any HD source, e.g. PSP3, DVD Player, HD Skybox etc.

Meliconi Ghost 430 Tilt and Turn Arm for 32" - 50" Screens

Thu, 04 Sep 2008 11:37:34 +0100

These GHOST Meliconi TV Brackets are the latest from this stylish Italian Company. The Ghost range of TV Brackets and TV Cantilever Arms combine functionality with looks and great build quality. This is reflected in their price as they are not the cheapest brackets we sell but they look great and are well put together.

The Ghost 430 is the "top of the range" TV Arm in this new series and will comfortable hold LCD or Plasma TV from 32" to 50" and with a maximum weight of 50KG. The brackets are all TUV Certified, they carry a 10 year manufacturer guarantee andall of the fixings (including wall fixings for a solid wall) are included.

The arm extends 21.5" (547mm) from the wall, the end tilts by up to 15 degrees it allow your TV to swivel left and right by up to 45 degrees. If you push the bracket flat against the wall it will be just a little over 5" (144mm) away from the wall. The arms also allow cable(s) to be threaded within the arms

The brackets are manufactured primarily from Aluminium not steel so they are very stong but more importantly much lighter than many other brackets you'll find. This is useful if you are in any way concerned about the combined weight of the TV bracket and your TV on the wall.

Meliconi Ghost 420 Tilt and Turn Bracket for 32"-50" Screens

Thu, 04 Sep 2008 11:25:50 +0100

The Ghost 420 TB Bracket will comfortably hold any LCD or Plasma TV from 32" to 50" and with a maximum weight of 45KG. The brackets are all TUV Certified, they carry a 10 year manufacturer guarantee andall of the fixings (including wall fixings for a solid wall) are included.

The arm extends 10.6" (269mm) from the wall, the end tilts by up to 15 degrees it allow your TV to swivel left and right by up to 45 degrees. If you push the bracket flat against the wall it will be just a little under 5" (129mm) away from the wall.

Meliconi Ghost 230 Tilt and Turn Universal Bracket

Thu, 04 Sep 2008 11:23:17 +0100

The Ghost 230 TV Bracket will comfortably hold any LCD or Plasma TV from 19" to 40" and with a maximum weight of 45KG - please check that your TV has either a VESA 100 or VESA 200 fixing on the back as this is not a universal bracket. (The distance between the X 4 fixing holes on the back of the screen should be a minimum of 100mm and a maximum of 200mm)

The brackets are all TUV Certified, they carry a 10 year manufacturer guarantee andall of the fixings (including wall fixings for a solid wall) are included.

The arm extends 19.8" (504mm) from the wall, the end tilts by up to 15 degrees it allow your TV to swivel left and right by up to 45 degrees. If you push the bracket flat against the wall it will be just a little under 4" (101mm) away from the wall.

Meliconi Ghost 220 Tilt and Turn Bracket for 19"- 40" Screens

Thu, 04 Sep 2008 11:19:22 +0100

The Ghost 220 TV Bracket will comfortably hold any LCD or Plasma TV from 19" to 40" and with a maximum weight of 45KG - please check that your TV has either a VESA 100 or VESA 200 fixing on the back as this is not a universal bracket. (The distance between the X 4 fixing holes on the back of the screen should be a minimum of 100mm and a maximum of 200mm)

The brackets are all TUV Certified, they carry a 10 year manufacturer guarantee andall of the fixings (including wall fixings for a solid wall) are included.

The arm extends 8.9" (226mm) from the wall, the end tilts by up to 15 degrees it allow your TV to swivel left and right by up to 75 degrees. If you push the bracket flat against the wall it will be just a little under 3.4" (86mm) away from the wall.

If you want to check if this bracket will fit your TV try our bracket finder here ---->

Meliconi Flat Vision Star 200 for 32" - 60" Screens

Thu, 04 Sep 2008 11:05:13 +0100

Meliconi are an Italian company that have been around since the 1960's and they bring a huge amount of style, flair and just "good design" to the TV Bracket and TV Stand market. Their Star TV Stands are available in Silver or Black and whilst they are not the cheapest stands we sell they look great and are well put together.

The Meliconi Star will comfortably hold any LCD or Plasma TV from 32" to 60" (maximum weight of 60KG, maximum weight on the shelfs is 15KG). This stand like all of the stands in the range is TUV Certified and carries a 10 year manufacturer guarantee.

Falcon Black Glass Wall Plasma Stand

Wed, 03 Sep 2008 15:36:33 +0100

This contemporary glass stand is designed to be both practical and stylish.

It is constructed from tempered glass and comes with cable management.

Stylish black glass Plasma / LCD stand with 2 shelves and cable management.

Black Square Glass and Metal Flat Panel Stand

Wed, 03 Sep 2008 15:27:50 +0100

This contemporary glass stand is designed to be both practical and stylish.

It is constructed from tempered glass and comes with cable management.

Stylish black glass and metal Plasma / LCD stand with 2 square shelves and cable management.

Black Round Glass and Metal Flat Panel Stand

Wed, 03 Sep 2008 14:05:05 +0100

Metal, AC Voltage and Stud Detector

Thu, 24 Jul 2008 16:24:22 +0100

Ideal tool if you are fitting a TV Bracket to your wall and you're not sure where the Electricty Cables or Water Pipes are! The great device detects hidden metal, gas and water pipes, live cables and any metal objects PLUS will identify Wood Studs in Plasterboard walls - all absolutely necessary to ensure the safe fitting of your TV Bracket.

Avoids drilling into unforeseen hazards. Able to trace live current and breaks in cables. Separate metal detection function for live power sensing. Locates timber studs in Plasterboard walls to ensure a secure fixing for heavy objects.

Full instructions enclosed. Batteries Required. Safety First, if in doubt contact a qualified electrician.

Pull out Tilt&Turn Bracket for 37-50" Screens

Thu, 24 Jul 2008 11:18:52 +0100

SALE NOW ON...!!! This is a new Black Pull out Tilt & Turn Bracket for 37-50" Screens. It has a built in Spirit Level to ensure accurate fitting, cable management to keep your AV cables in check and includes all the fixings you need to affix your TV to the bracket and hang it on your wall! Pans left & right by 45 degrees.

Manufactured from Steel and Aluminium its capable of supporting Plasma and LCD's up to 60Kg and with a maximum screen size of 50". The bracket extends to a maximum of 39cm from the wall (15.4") but is only 11.2cm (4.4") when pushed back flat against the wall. Your can also tilt the TV when mounted by up to 15 degrees.

All in all an excellent bracket with loads of flexibility thats great value for money.

Pull Out Tilt & Turn Bracket for 23-37" Screens

Thu, 24 Jul 2008 10:56:35 +0100

New Black Pull out Tilt & Turn TV Bracket for LCD & Plasma TV's from 23" to 37" and with a maximum weight of 40Kg.

Includes cable management to keep your AV cables in check and includes all the fixings you need to affix your TV to the bracket and hang it on your wall! Pans left & right by 180 degrees.

Manufactured from Steel and Aluminium the bracket extends to a maximum of 39cm from the wall (15.4") but is only 11.2cm (4.4") when pushed back flat against the wall. Your can also tilt the TV when mounted by up to 15 degrees.

All in all an excellent TV bracket with loads of flexibility thats great value for money.

Select Mounts Tilting TV Wall Bracket for 17"- 37" Screens

Thu, 24 Jul 2008 09:17:32 +0100

SALE NOW ON...!!! - Whilst Stocks last on this bracket. This is a super little tilting TV bracket from Select Mounts that will mount your TV pretty flat to the wall but also give you the option to tilt the TV downaward by 15 degrees. - Its suitable for screens up to 37" providing the fixing holes on the back of the TV are no more than 300mm x 300mm apart (check our screen fitter solution if you're not sure or just give us a ring and we'll be delighted to help)

All the fixings are included in the box together with easy to follow instructions. The beauty of this bracket is that it has an embedded spirit level so there is no excuse not to fit it dead straight and it really does make the job of fixing it to the wall that much easier!

Features & Specification:

UNIVERSAL Fixed LCD WALL MOUNT
Colour: Black
Maximum weight capacity of 60Kg
Suitable for plasma/LCD screens between 17-37.5"
Designed to VESA STANDARD upto 300x300
All fittings included for easy installation
Built in spirit level.
Slides left and right.
Only 63mm deep from the wall.
Lifetime Guarantee!

OneClean DuoPack (Screen & Keyboard)

Tue, 30 Nov 1999 00:00:00 +0000

How Clean is your screen and Keyaboard - Combo Pack to sort out both!

There are many different screen cleaning products on the market and customers receive varying advice on the matter from both flat screen manufacturers and retailers. Flat screen surfaces differ in quality although most of them are made of plastic. Plastic surfaces are very sensitive and are easily damaged or scratched by daily use and cleaning.

Tests show that the use of the wrong cloth, such as normal housekeeping cloths, can leave serious scratches on the surface even after cleaning only a few times. AM Denmark uses only microfibre produced with round fibres and soft ends that ensure that the material itself does not cause microscopic scratches.

And whilst you're cleaning you might want to consider when did you last look at your keyboard? - Really looked!

During the course of the day, we touch thousands of different things that others have touched. Subsquently, people sit down at their keyboards and merrily type away. You sneeze, spill a little coffee, perhaps a few crumbs also fall down into your keyboard. After a while, a good mixture is formed that creates a breeding ground for bacteria - quite a lot of bacteria.

A study performed by an American research centre has shown that there are approx. 510 bacteria per cm2 on a keyboard in a normal office enviroment. These are only 8 bacteria per cm2 on a toilet seat. Where are you going to eat your next meal?

Thor HD TV Connection Kit

Tue, 30 Nov 1999 00:00:00 +0000

Thor HD TV Connection Kit 5 Metre HDMI Cable & 2x HDMI to DVI Adaptors

This cable is rated as "Highly Recommended and awarded 5 Stars in the May edition of "What Hi-Fi Sound and Vision"

Allows you to connect your satellite box or similar HD device to your high definition-ready TV set with HDMI/DVI. The connectors are made from either oxygen-free copper or ultra-high quality PCOCC to help minimise signal distortions. The di-electric core construction helps to prevent high frequency audio signals from being interrupted, while the gold-plated brass connectors give maximum contact area to protect from external interference. Basically just a top quality cable set!

LabGear HDMI Cables - "24k Gold Plated"

Tue, 30 Nov 1999 00:00:00 +0000

These are (High Definition Multimedia Interface) leads from Labgear and are high quality cables with gold tipped plugs which give excellent connectivity. Suitable for all HD equipment with HDMI connections. (PSP3, SKyBox, BlueRay, HDDVD etc)

The Labgear cables comply fully with the latest HDMI 1.3 Specification

OneClean Screen cleaner AM 85146

Tue, 30 Nov 1999 00:00:00 +0000

The stylish screen cleaner from AM - the Danish Company that has been at the forefront of Award Winning Cleaning Solutions for many years!

The OneClean Screen cleaner^TM AM 85146 is Perfect for cleaning all types of TV and computer screens. CRT, LCD, TFT, Plasma TV's etc. Cleans both glass, plastic and coated screens.

Easy and safe in use

The water based cleaning fluid is developed for safe use on all type of screen surfaces.
The cleaning fluid contains no type of alcohol or aggressive chemicals that will destroy your screen surface.
The soft micro fibre cleaning cloth is mounted on a soft sponge that follows the curves and movements.
The micro fibre is non scratching even on delicate surfaces.

AM screen cleaner formula - AM's specially developed water-based screen cleaner formula contains no IPA or other alcohol. Our formula is effective, but also gentle. AM's screen cleaner fluid can be used on all types of screens or surfaces.

Vogel's EMO TriMotor Motorised Bracket

Tue, 30 Nov 1999 00:00:00 +0000

The Vogels TriMotor^TM TV Bracket features an electronic multi-directional movement (turn, tilt and movement forward) and is compatible with medium to large screens (37"-52" up to 43 kg). Designed for universal use (VESA compatible) - check our bracket finder solution if you are not sure.

The TriMotor^TM is equipped with three motors, as the name suggests. It assures a remote-controlled movement forwards, backwards, tilted 15 degrees and turned 20 degrees to the left and to the right. It also comes with an auto home function button on the remote control and an automatic built-in Screen Protection System to avoid damage to the screen and/or the wall.

Features:

Motorised wall support suitable for Flat Screens from 37 to 52" in size
Allows the user to turn, tilt and extend screen all by remote control (either remote supplied or Universal remote control with learning function)
Flat Screen extension from wall between 76 and 200mm
Weight capacity 43kg
Screen can pan left or right, 20° in either direction (40° total)
Screen can tilt 15° (10° forwards, 5°back)
Autohome feature retracts mount back into closed position at the touch of a button
Automatic Screen Protection System^TM
Anti-trap function prevents accidental closing
Memory function allows recall of two preset positions
Accommodates Universal mounting pattern, including VESA 200x200 and 800x400
Supplied with remote control, adaptor plates, power supply and comprehensive fixtures and fittings
18 language instruction booklet
5 year guarantee (2 years on electronic parts)
VESA, RoHS, CE and WEEE compliant
TUV/GS certified

Swingout TV Arm (SOAD) with Universal Adapter (BT7505)

Tue, 30 Nov 1999 00:00:00 +0000

This is the "bigger brother" to the Premier Mounts AM2 Swingout TV arm and gives greater support to larger/heavier TV's and is ideal if you want something a "bit more substantial" to support your TV. It will comfortably support larger flat panel displays weighing up to 36kg.

The unit has three pivot points and gives customers amazing flexibility in moving their display. The mount can extend from under 13cm (5") to over 50cm (20") from the wall, pivot over 180° and tilt ±10° (depending upon display).

Its slim base is designed to mount easily to single studs without the need for adapters or reinforcement plates. The SOAD fits VESA standard mounting points and is available in silver only

This Mounting Kit consists of two items, a mounting arm and a backing plate. It is suitable for brick, concrete, stud and dry walls.

We have bundled the SOAD here with a Uninversal Adapter plate so that it can be used on TV's with wider screen fittings on the back of the TV. The Universal Adapter (B-Tec model BT7505) supports screen fixings up to 570mm x 300mm

Price includes Delivery and VAT

AM2 + BT7505 Bundle - Pull out Tilt/Turn TV Bracket PLUS Universal Adapter

Tue, 30 Nov 1999 00:00:00 +0000

Now available in Black

Recommended for 17"-40" LCD displays, this full-articulation swingout TV mount can be pulled out 17" from the wall. It also offers significant tilt and pivot using Premier Mounts innovative Radial Glide Technology^TM. Click on the small image and then the "Image Gallery" for more images and pictures of the Black version of the AM2.

Includes a Universal Adapter Plate to enable the AM2 to be used with TV's with wider fixings or non VESA fixings. The additional adapter (B-Tec model BT7505) supports screen fixings up to 570mm x 300mm

Note if you order a BLACK AM2 the adapter will also be BLACK

Click here to view the installation manual

Click here to view the Data Sheet

Click here to view the Technical Specification Details and Drawings

Vogel's Professional PFW3240 - Adjustable Bracket

Tue, 30 Nov 1999 00:00:00 +0000

The Vogel's Professional PFW 3240 LCD wall support with two extension arms offers the optimum flexibility in display positioning. Includes "Theft Delaying Features" making this an ideal choice for public display applications with Digital Signage, Hotel & Leisure or other commerical applications. Suitable for 23" to 32" Screens with the appropriate VESA fixing support

The PFW 3240 series provides security against unauthorised display removal by using a discrete padlock and security displays screws with a special allen key. The stylish and high quality finished aluminum design matches any interior.

Can of course also be used in the home with or without the Padlock security option

B-Tech Mobile LCD/ Plasma Trolley - BT8004

Tue, 30 Nov 1999 00:00:00 +0000

This superb Trolley from B-Tech (Model: BT8004) is designed specifically for plasma screens and LCD screens. It has a heavy duty base (available in either silver or graphite black finishes) which in turn supports two 60mm chrome poles, on which the adaptor plate is mounted.

Included in the price are X 4 non-marking (braked) castors that really come into their own when you have to transport the Trolley to any show, exhinition or conference. Its strength, build quality and movability make it an ideal choice for use in boardroom presentations, colleges and schools or for display purposes. Alternate levelling feet are provided as standard.

Cable are managed within the chrome poles and the Trolley fits all TV's from 32" to 60" but you will need to add the correct adapter depending on the VESA Fixings (the four mounting holes on the back of your TV) - just call us if you need any help! - Also check the images in our Image Gallery below.

Premier 360 Degree Universal Rotational TV Mount - RFM

Tue, 30 Nov 1999 00:00:00 +0000

Introducing a Whole New Viewing Perspective

As the industry’s only large screen flat-panel TV wall mount that’s designed for portrait or landscape configurations (while keeping your display flat against the wall), the new RFM lets you view your display anyway you like. Suitable for TV/Screens from 37" - 61" and with a maximum weight of 73Kg.

Price includes a lifetime warranty from Premier Mounts

Vogels EPW 6565 Projector Wall Solution

Tue, 30 Nov 1999 00:00:00 +0000

The EPW 6565 Projector Wall Module lets you mount your projector on the wall with style. You can easily position your projector and secure it to maintain a stable image while viewing. It comes with the universal EPA 6505 Projector Connector that fits virtually every projector weighing up to 10 kg. Due to the Easy Connect feature, the EPC 6540 is part of the Vogel’s Click & Switch system.

Now you can mount your projector on the wall. The flexible horizontal arm lets you position your projector in a number of different ways. The arm can be reversed so that you can mount your projector facing either straight up or upside down for the best projection at any height. No matter what size projector, with the adjustable arm you can easily position your projector horizontally (near to the wall) and vertically (for the ideal height). The unique spherical hinge joint has a huge range of movement so you can position your projector wherever you desire. With the Adjust & Secure feature you can lock the projector into position. You can easily hide and guide your cable at any height with the patented AdvanCISTM Cable Inlay System. When not in use, simply remove your projector and the horizontal arm with a single click. The EPW 6560 can be equipped with an additional universal padlock to prevent theft. The EPW 6565 is a complete Wall Solution that comes with the EPA 6505 Projector Connector and the EPW 6560 Wall Module.

HDMI Switch with Remote Control

Tue, 30 Nov 1999 00:00:00 +0000

Share your HDMI or DVI-D sources with a single HD monitor. This unique switch allows you to switch between 3 or 5 HDMI sources (settop box, DVD players, video game stations, computers) and your Hi Def monitor. This switch passes both digital and audio signals through the HDMI ports!

Now available with V1.3 Full HD and Deep color support.

BLACK Wall Mount for 37"-63" Screens - XUT3763B

Tue, 30 Nov 1999 00:00:00 +0000

This is another in the new "BLACK" range of TV brackets from Premier Mounts. This is a tiltable (+/-10 degrees) TV wall mount for screens between 37" & 63" Screens. When fitted the TV is only 6.2cm from wall

Because of the flexibility of this TV bracket it is guaranteed to fit all 37" to 63" Plasma and LCD TV's including those that sometimes struggles with Universal brackets because they have wider fitting holes on the back of the screen

Features of this TV Bracket:

Colour: Black
Max Mounting Points: 800mm(wide) x 525mm(high)
Max Load: 80KG
Mounted distance from wall: 62mm
Tilt: +/- 10 degree (up or down)
Fixings: All Fixings to mount the TV to the bracket included

New boxed stock with a 10 year warranty.

The Bracket is from the Premier Mounts "Victory Range" and comes with a 10 year guarantee.

BLACK Tiliting TV Wall Mount for 26"-37" Screens

Tue, 30 Nov 1999 00:00:00 +0000

NEW Product - This Universal Tilting TV Bracket from Premier Mounts gives you a 10 degree tilt to achieve the optimum viewing position. Suitable for all 26-37" TV's with a maximum mounting interface on the back of the TV of up to 525mm (wide) by 400mm (high).

Easy to install and comes with full instructions and all fixings for your TV

Colour: Black
Max Load: 57KG
Mounted distance from wall: 62mm
Tilt: +/- 10 degree (up or down)
Fixings: All Fixings to mount the TV to the bracket included

All our brackets are New boxed stock with a 5 year warranty.

Flush Fit TV Bracket for 26-37" Screens - XUF2637B

Tue, 30 Nov 1999 00:00:00 +0000

This is another in the "FLUSH FIT" range of TV Brackets from Premier Mounts - these BLACK TV brackets will position you TV 3.7cm from wall and as its name implies, gives you a tight fitting against the wall.

New boxed stock with a 5 year warranty.

Installation is easy and straigtforward and all fixings are included together with clear instructions. The bracket will fit all TV's in the 26" to 37" range including those with much wider fitting positions like Philips

The weight tolerance is 50Kg so it will easily accomodate LCD and Plasma TV's.

Click here to view the installation manual

Click here to view the Data Sheet

Click here to view the Technical Specification Details and Drawings

BLACK Flush Fit TV Bracket for 37-63" Screens

Tue, 30 Nov 1999 00:00:00 +0000

NEW Product - Launch Offer. This is another in the "FLUSH FIT" range of TV Brackets from Premier Mounts - this BLACK bracket will position your TV 3.7cm from wall and as its name implies, gives you a tight fitting against the wall.

New boxed stock with a 5 year warranty.

Installation is easy and straigtforward and all fixings are included together with clear instructions. The bracket will fit all TV's in the 37" to 63" range including those with much wider fitting positions like Philips

The weight tolerance is 80Kg so it will easily accomodate LCD and Plasma TV's. Fits all mounting points up to 800mm (Wide) and 525mm High

The price includes "next business day" delivery via ParcelForce

Click here to view the installation manual

Click here to view the Data Sheet

Click here to view the Technical Specification Details and Drawings

BELKIN - Cable/SCART FLAT VIDEO CABLE 8ft

Tue, 30 Nov 1999 00:00:00 +0000

Top quality flat Scart Cable from Belkin under their PureAV brand (Model: AV51501BEA08)- this is an 8ft (around 2.5m)

Sleek design for an unsurpassed home theater experience. Engineered to ensure the clearest picture and the cleanest sound, PureAV cables and accessories provide maximum rejection of noise and interference that can compromise your entertainment experience. PureAV employs rarely used, fine-quality materials, advanced technology, and the latest manufacturing methods to elicit the best-possible performance from your home theater equipment.

Product Description

Belkin Pure AV Silver Series - video / audio cable - 8Ft
Cable: Video / audio cable
Technology: Triple shielded
Length: 8Ft
Left Connector(s): 21 pin SCART - male
Right Connector(s): 21 pin SCART - male
Technology Features: OFC (Oxygen Free Copper), silver-plated conductors
Additional Features: Gold-plated connectors, Flat

B-Tech Aluminium Cable Cover (BT7070)

Tue, 30 Nov 1999 00:00:00 +0000

Stylish way to hide your cables - these aluminium cable covers securely holds up to 3 cables. Can be cut to size.

Securely holds up to 3 cables - maximum cable diameter 10mm. Cable Holders screw directly into wall. Easy installation - coverplate clips onto cable holders and leaves a high quality aluminium finish.

Vogels EFW 2001 Flat on the Wall TV Mount

Tue, 30 Nov 1999 00:00:00 +0000

This is a FLUSH FIT TV wall mount from the highly regarded Vogels Range - its ideal for LCD/Plasma screens 25-65" and up to a maximum weight of 70kg. Positions the TV only 54mm from wall. Fits mounting holes up to 93.5 x 51.2cm (W x H) apart.

This mount is suitable for TVs with wall mounting screw-holes up to 935 x 512mm (W x H) apart. The width of the backplate that goes onto the wall is only 354mm and the height is only 300mm.

All screw-fittings into the back of the TV are included as are the wall fixings and as you'd expect from Vogels the mount is manufactured from heavy duty steel and comes with a 5 year warranty.

Will this bracket fit my TV?

Your TV must weigh less than 70kg and have a screen diameter between 25 and 65"

On the back-plate of the TV there must be 4 or 6 threaded screw-holes, set out in a square or rectangle, spaced between 200mm & 935mm horizontally and up to a maximum of 512mm vertically.

The Vogel's EFW2001 is particularly good for use with Philips and LG TVs as some have 800mm wide fittings, wider than most flush-fit brackets can cope with.

Spectral Panel PL152

Tue, 30 Nov 1999 00:00:00 +0000

The Spectral Panel range of TV (Plasma & LCD) Stands combine capacity with stylish good looks - accommodating medium-sized to extensive LCD/Plasmas in a simple aluminium and glass structure that will enhance any room.

The Panel PL152 features a rotating and tilting plasma screen mount and twin AV storage shelves in clear, frosted or black glass.

Cable ducting at the rear ensures a clutter-free installation, while the twin glass shelves have an increased width of 1400mm, providing storage for a more extensive AV system.

Spectral Panel PL151 Stand

Tue, 30 Nov 1999 00:00:00 +0000

The Spectral Panel range of PLASAMA and LCD Stands combines capacity with stylish, accommodating medium-sized to extensive LCD/Plasmas in a simple aluminium and glass structure that will enhance any room.

The Panel PL151 features a rotating and tilting plasma screen mount and twin AV storage shelves in clear, frosted or black glass.

Cable ducting at the rear ensures a clutter-free installation, while the twin glass shelves have an increased width of 1100mm, providing storage for a larger AV system.

Spectral Panel PL161 Plasma Stand

Tue, 30 Nov 1999 00:00:00 +0000

The Spectral Panel PL161 Plasma Stand is a wider stand than the PL160, and for this reason its ideal if you've got loads of AV kit to store or perhaps you just want this "bigger" look. The PL161 stand has a built-in 90° swivel that lets you point your plasma or LCD screen at your viewing position for optimum picture quality. The TV mount can hold a plasma or LCD screen of up to 43in. and has a load bearing of 40kg.

The twin storage shelves below come in a range of colours – clear, matt, snow, grey, black and berry – to match your taste and décor.

Spectral Panel PL150

Tue, 30 Nov 1999 00:00:00 +0000

The Spectral Panel Plasma Stand combines capacity with stylish, accommodating medium-sized to extensive LCD/Plasmas in a simple aluminium and glass structure that will enhance any room.

These stands are all hand built hence the premium price but the build quality and finish is superb. The Panel PL150 Stand features a rotating and tilting plasma screen mount and twin AV storage shelves in clear, frosted or black glass. Cable ducting at the rear ensures a clutter-free installation, while the twin glass shelves provide storage for a medium-sized AV system.

Spectral Curve QX100

Tue, 30 Nov 1999 00:00:00 +0000

The Spectral Curve QX100 TV Stand is a stylish way to mount your LCD or Plasma TV. It's capable of supports screens up to 20kg in weight on the 100 x 100mm VESA fixture. VESA 120 (100 x 200mm) and VESA200 (200 x 200mm) adapter plates are also available. - just call us if you need these

The glass plinth is available in a choice of clear, frosted or black glass, and castors are available as an optional extra to increase ease of movement.

Scart Lead Individually Screened with Gold-Plated Contacts

Tue, 30 Nov 1999 00:00:00 +0000

These are "long reach" Scart Cables in either 5m or 10m lengths. Manufactuferd by Philex with moulded connectors and gold plated contacts they are ideal if your are looking to hook up your AVkit over a long distance. Each cable is individually screened.

Don't forget to add these to your TV Bracket order and save on the postage costs.

HDMI White Wall Plate

Tue, 30 Nov 1999 00:00:00 +0000

HDMI Wall plate with full circuitry for carrying up to 1080p. At the rear of the plate the HDMI socket is located vertically for easy insertion of HDMI cable for in-wall installations. Easy connection by use of modular wall plate. Supplied with 47mm depth back box.

Gold Standard HDMI Cable - 1.8m

Tue, 30 Nov 1999 00:00:00 +0000

This is a 1.8M Gold Standard HDMI Lead that is V1.3 compliant. The cable is a19Pin Male to 19Pin Male (standard configuration) and is ideal for connecting your HD TV to any HD source, e.g. PSP3, DVD Player, HD Skybox etc.

The cables have interference suppression technology and carry a lofetime money back guarantee

AviLock Motion Sensitive Alarmed Cable Lock

Tue, 30 Nov 1999 00:00:00 +0000

If you're looking for a way to secure your TV to the TV Bracket you've mounted the TV on then this neat little solution from B-TECH will help - simply connect the unit to the TV/Projector and if anyone tries to move it a 100db alarm will sound! - there is a delay on the unit to allow you to lock/unlock it so you can set/reset etc. Key in your own code.

Comes with 60cm retractable metal cable.

B-Tech Tiliting Bracket - Screen to 32" (BT7522)

Tue, 30 Nov 1999 00:00:00 +0000

Simple tilting wall mount LCD's up to 32" (with 75x75mm, 100x00mm or 200x100mm VESA fixing patterns)

The BT7522 mounts the screen only 55mm from the wall and allows the screen to be tiled up or down by up to 30 degrees (all mounting hardware is included).

Unique security screws, together with long hex key, are provided as standard to lock the screen to the bracket and help prevent theft. This bracket can be mounted on single wood studs or concrete / brickwalls (mounting to metal studs requires special metal stud fasteners which are not supplied).

B-Tech Flat TV Mount for Screen up to 32" - BT7521

Tue, 30 Nov 1999 00:00:00 +0000

This is a simple, no frills, flat on the wall TV mount from B-Tech Brackets. It will fit any screen up to 32" weighing up to 24Kg and with a VESA fitting on the back of 100x100mm or 200x100mm (this is the space between the 4 fitting points on the back of your TV)

Fits so that your TV only 18mm from the wall.Available in BLACK or SILVER and comes with all fixings.

B-Tech Flat Fitting TV Bracket for up to 32" - BT8421

Tue, 30 Nov 1999 00:00:00 +0000

The BT8421 from B-Tech is a "Flat Fit" universal wall mount designed for flat panel Plasma/LCD screens from 22" to 32"

The distance between fixing points on the back of your Screen must be within 250mm (vertical) & 475mm (horizontal). The bracket mounts your screen only 30mm from the wall.

Suitable for all types of walls. Full instructions, fixing kit and locking bar (for secure installation) are included

B-Tech Flat Fit TV Bracket for Screens to 60" - BT8422

Tue, 30 Nov 1999 00:00:00 +0000

Simple, straightforward TV bracket for LCD or Plamsa TV's from 37" to 60". This B-Tech TV Bracket will mount you screen 30mm from the wall, A universal TV mounting kit is included and its suitable for all wall types.

Price includes locking bar for secure installation and free next business day delivery by ParcelForce

GD02 LCD/TFT Swing Arm Wall Mount - Silver

Tue, 30 Nov 1999 00:00:00 +0000

GD02 is an universal wall mounted LCD PC Monitor arm. It is VESA standard compliant so will fit pretty much any Monitor. It's use improves the ergonomics of workplace and liberates your desktop.

GD02 LCD/TFT swing arm mounted in desired position, ensures infinite positioning of your monitor for the most adequate viewing angle.

LCD/TFT monitor can be extended 323 mm from the wall and retracted against the wall when it is not longer needed.

Click here to read the technical

specification for this mount

Vogels DVDock - LCD Headrest support

Tue, 30 Nov 1999 00:00:00 +0000

The DVDock headrest support for portable DVD players is the ideal solution for 'backseat entertainment'.

Don't use a flimsy bag that is difficult to install, frustratingly unstable and makes your car interior look cheap and tacky. Instead use DVDock, the perfect alternative. It fits in most cars (except Volvo) and compatible with most players up to 10'' (screensize). The DVDock is easy to install, and placing/removing your player is done in seconds. The tilt function allows for the perfect viewing angle (reduce sun reflection in your screen). Last but not least : it has stylish design and is made of high quality materials.

Everyone has more fun with Vogel's DVDock™, the new LCD Headrest support for your portable DVD player that's stylish and sturdy. It turns your backseat into a deluxe on-the-road theatre, which will make every beackseat passenger speechless during the whole trip. Unlike flimsy bags that slide all over the place, DVDock™ holds your screen firmly in place so you don't have to watch a bouncing screen. You can tilt it for the best viewing angle and easily slide the DVD player in and out. No more wrestling with straps and belts to install it. Just turn the Allen key to secure it firmly in place. The DVDock™ looks great and elegant in any style of car.

Cover Pack for Premier Mounts Stands/Trolleys (CPA)

Tue, 30 Nov 1999 00:00:00 +0000

Optional MAGNETIC cover pack for Premier Mounts stands and trolleys. Allows you to hide the chrome poles to give a clean/neat finish. It provides more cable management options through the covers.

Stackable TV Trolley for Screens 37-61" (BW60UFA)

Tue, 30 Nov 1999 00:00:00 +0000

NEW Product from Premier Mounts - this nesting stand for TV's up to 61" allows you to "nest" them together so if you've got more than one they can be pushed together a bit like shopping trolleys.

The unit is 170cm High. Suits LCD/Plasma screens 37-61". Supports up to 73kg. Includes heavy duty, lockable castors and it has cable management.

This stand consists of:

Base with a depth of only 70.58cm
152 cm (60") Polished Chrome Poles x 2.
Plasma Mounting Plate for 37" to 61" screens, rotates 360 degrees.
4 x castors (2 x braked, 2 x non braked)

OPTIONAL Accessories - Glass Shelf to hold your DVD, Digibox etc.

Glass Shelf for Premier Mounts Stands (PSD-SHV)

Tue, 30 Nov 1999 00:00:00 +0000

This is an optional/additional glass shelf for use with the Premier Mounts range of stands.

Maximum weight of 12Kg making it ideal for supporting SkyBox's, DVD players, Games Consoles. etc.

Easy to fit and maintain.

Set of 4 Castors (2x brake, 2x non-brake)

Tue, 30 Nov 1999 00:00:00 +0000

Set of 4 Castors for use with Premier Mounts EB60 series TV Stand. Each pack contains X 2 braked and X 2 non-braked castors. Easy to fit and provide excellent movement options for the EB60 62" and 72" Stands

Single Pole LCD Floor Pole for Screens 10-40" (B60-PRT)

Tue, 30 Nov 1999 00:00:00 +0000

This is a TILTABLE (+-15 degrees) single pole stand for LCD/Plasma screens up to 40". Supports up to 45kg. Freestanding, but the heavy base can be bolted to floor for added safety/security.

Its possible to attache multiple screens to the pole - we supply it with just one mounting plate as standard but additional mounting plates can be purchased. just call us on our Freephone number for details

This stand consists of:

1 x 152cm (60") Polished Chrome Pole.
1 x LCD/Plasma Mounting Plate for TV up to 40".
1 x Base

Suitable for Screens with VESA mounts: 75x75mm, 100x100mm, 200x100mm (and 200x200mm with additional UFP280 plate)

Heavy Duty Ceiling Mount for 32-61" Screens (MS2S)

Tue, 30 Nov 1999 00:00:00 +0000

Professional Version Ceiling Mount from Premier Mounts with Universal Backplate to allow it to support screens up to 61" and with VESA and non VESA fixings - shown here with the standard 0.5M pole but other fixed pole lengths up to 3M are available. Call us for pricing if you need a longer pole.
Optional attachements include: Angled Ceiling Plate & RSJ (Beam) Clamps. Integral cable management (within the pole). All fixings are included and it comes with a Lifetime warranty from Premier Mounts.

Heavy Duty Ceiling Mount for 10-50" Screens (PRT)

Tue, 30 Nov 1999 00:00:00 +0000

Professional Version Ceiling Mount from Premier Mounts - shown here with the standard 0.5M pole but other fixed pole lengths up to 3M are available. - Call us if you need a longer pole.
Support TV's up to 50" with a 75x75mm, 100x100cm, 200x100cm and with a maximum weight of 36Kg. Will support 200x200mm VESA fixings with the additional UFP280 adapter plate.
Optional attachements include: Angled Ceiling Plate & RSJ (Beam) Clamps.
Integral cable management (within the pole). All fixings for your screen or TV are included and it comes with a Lifetime warranty from Premier Mounts.

Ceiling/Projector Mount (NovaPro Version)

Tue, 30 Nov 1999 00:00:00 +0000

Professional Version of the Projector Mount from Premier Mounts - shown here with the standard 0.5M pole but other fixed pole lengths up to 3M are available. - Call us if you need anything other than a 0.5M pole

Includes "SpiroLock" technology for ease of use/implementation. Allows the projector to be installed/removed in seconds.

Integral cable management (within the pole). All fixings are included and it comes with a Lifetime warranty from Premier Mounts.

In brief:

Colour: Black
Max weight: 30Kg
Warranty: Lifetime
Swivel: 360 degrees
Tilt: 6 degrees
Optional extras: Angles ceiling plate & Beam (RSJ) clamp) - call us if you require these

Premier Mounts Universal Table Top Stand for 32-50" (PSD-TTS)

Tue, 30 Nov 1999 00:00:00 +0000

This new universal tabletop TV stand fits most 32-50" LCD/Plasma displays. Adjustable mounting arms can be positioned anywhere along vertical chrome posts so you can achieve the perfect viewing height.

This table top stand is designed to fit most TV's. If in doubt please give us a ring and we will advise on suitability for your TV.

At a glance:

Suitable for most screens: 32-50"
Maximum mounting points: 770mm (wide)
Max load: 73Kg
Colour: Silver
Warranty: Lifetime

Ultra-Flat TV Bracket for up to 40" Screens (PRF-220)

Tue, 30 Nov 1999 00:00:00 +0000

This Ultra "Flat on the Wall" bracket for TV's up to 40" BUT with a maximum VESA fitting on the back of your TV of 200 x 100mm (fine for 75x75mm and 100x100mm also).

These TV Brackets are only 19mm deep so you really can achieve that "flat on the wall" look for your TV.

Manufactured by Premier Mounts the TV Mount comes with a Lifetime warranty. The Price includes VAT and Delivery

Flip Down (Under Cabinet) Bracket - up to 18" Screens

Tue, 30 Nov 1999 00:00:00 +0000

Ideal solution if you are looking to put a TV in your Kitchen or bedroom and want to mount it under a cupboard so it "flips down" when you want to view the TV but then of course the TV can be stored out of the way when not in use. Only suitable for smaller screens up to 18" with a VESA fitting on the back of 75x75mm or 100x100mm

Chrome bracket from Premier Mounts with a Lifetime warranty.

At a glance:

Fits 10"-18" displays.
Compatibility: VESA 50/75/100mm
180° pivot (once lowered)
Max TV Weight 12Kgs

Click here to read the technical
specification for this mount

Flat on Wall TV Bracket for up to 30" Screens: XUF-1330L

Tue, 30 Nov 1999 00:00:00 +0000

Cracking little TV bracket for 13" - 30" LCD TV's . Your TV will need to have a standard VESA Fixing on the back meaning the spaces between the screw positons need to be either 75mmx75mm or 100mmx100mm apart. Discrete TV mount that will hold your TV (18Kg maximum) only 42mm from the wall.

Includes all the fixings you need to affix your TV to the bracket and the fixings to affix the bracket to a stud wall (or concrete walls) - it is suitable for fixing to other wall types you just need to buy the appropriate fixings

Price includes VAT and Delivery.

Adjustable Height Ceiling Mount (CM2)

Tue, 30 Nov 1999 00:00:00 +0000

This is an Adjustable Height Ceiling Mount from Edbak (The highly regarded Polish TV Bracket Manufactuer). The bracket is adjustable from 1.75m to 2.45m and it can also be fold flat against the ceiling.

Suitable for screens from 22" to 60" with the correct bracket adapter (LWB1 or PWB2 which are sold seperately).

Click here to read the technical

specification for this mount

Alphason AG94/2-B Plasma Stand for Screens to 43"

Tue, 30 Nov 1999 00:00:00 +0000

This stunning black plasma stand from Alphason is a unique flat panel support with 2 clear safety glass shelves.

The AG94/2-B is precision engineered to a high standard, complete with universal fixing bracket for up to 43" Plasma or LCD screens. Convenient height adjustment enables any screen size to be positioned in the correct viewing position for individual preference. The shelves are manufactured from 8mm toughened safety glass with edges polished and shaped offering the assurance of personal safety.

The Alphason AG94/2-B is finished in striking black to match many of todays plasma screens. Simply stunning!

In Brief:

Unique Cantilever TV Stand precision engineered to a high standard, complete with universal fixing bracket for up to 43" Plasma or LCD screens.

Convenient height adjustment enables any screen size to be positioned in the correct viewing position for individual preference. Overall height - 1085mm (423/4").

Safety glass shelves toughened to BS6206A with edges polished and shaped offering the assurance of personal safety. Safety Glass Thickness - 8mm.

Stunning matt black finish to complement the design and styling of modern AV equipment and flat panels. Also available in silver.

Cable Tidy facility incorporated into rear support, with sufficient space to conceal the wiring from both the screen and associated AV equipment. Rear column also features damping pads to reduce proliferation of unwanted vibrations.

Ample shelf space to support AV equipment, including DVD player, video recorder, satellite receiver or home cinema system with centre speaker.

Spacious shelf height and width - with shelf spacing of 185mm (7 1/4"), and front aperture of 945mm (371/4") between supports and usable shelf depth of 472mm (181/2"). Overall width of 1167mm (46") and depth 570mm (221/2").

Alphason Apex Plasma Stand for Screen up to 50"

Tue, 30 Nov 1999 00:00:00 +0000

The Alphason Apex APX-50/4-B is a stunning new addition to the range, boasting a central column and universal bracket for LCD and Plasma screens up to 50".

The unique design gives 90 degrees of swivel action to ensure the optimum viewing angle. The APX-50/4-B has four toughened safety glass shelves in a 'floating' design to accommodate AV equipment.

Unique design with central column anduniversal fixing bracket for LCD and Plasmascreens up to 50" (max 40Kg). Precision engineered to the highest standards. Hook-on screen mounting bracket for easy and secure assembly.

Safety glass shelves toughened to BS6206A with polished and shaped edges to give the assurance of personal safety. Safety Glass Thickness: 5mm.

Cable management facility incorporated into rear of central support, with sufficient space to conceal the cables from both the screen and associated AV equipment. There is also room for a 4-way extension lead.

Snap-in rear covers allows easy access to all cables and Scart leads.

Overall Height: 1170mm
Usable height between shelves: 152mm
Usable shelf width: 470mm (each shelf)
Usable shelf depth: 450mm

The Alphason APX-50/4-B is finished in stunning black to compliment many of the new Plasma/LCD's now being launched.

CLICK ON IMAGE GALLERY FOR TECHNICAL DRAWING & MEASUREMENTS

Jual Large Glass TV Stand - JF002

Tue, 30 Nov 1999 00:00:00 +0000

The JF002 TV Stand from Jual Furnishings is a modern Stand that is suitable for panels up to 50" in size. The JF002 TVStand has square sides that makes it ideal for mounting the TV flat to the wall. Constructed with quality Aluminium uprights and toughened glass, the top surface comes unobstructed. Jual's rigid design ensures a very stable support that will improve the performance of both video and audio products.

The TV Stand is available in Black with Smoked Black Glass or Silver with Clear Glass Shelves

This support features our Enclosed Cable Management System, with glass shelving to accommodate all your AV Equipment. Glass is toughened to British Safety Standard: BS6206

Top Glass: 10mm, Middle & Bottom: 6mm
Size 1080mm Wide x 400mm Deep x 500mm High (see image in Image Gallery for full details/dimensions)

Jual Glass TV Stand - JF003

Tue, 30 Nov 1999 00:00:00 +0000

A popular corner TV Stand from Jual Furnishings thats suitable for any LCD/Plasma TV up to 37". Features highly polished glass edges and a subtle radius to the front of the support. Jual's rigid design ensures a very stable support that will improve the performance of both video and audio products. ENCLOSED CABLE MANAGEMENT SYSTEM

Glass is toughened to British Safety Standard: BS6206. Shelf weight limits: Top shelf 85Kg, each subsequent shelf can hold 65Kg. Top Glass: 10mm. Middle & Bottom: 6mm

This TV Stand is available in Silver with clear glass or Black with Smoked Black Glass

Beech TV Stand for Screens up to 28" (JF010)

Tue, 30 Nov 1999 00:00:00 +0000

This elegant TV Stand from Jual Furnishings support can accommodate up to a 28'' LCS/Plasma TV's. With the attractive beech uprights and Integrated Cable Management System, the JF010 Stand will compliment your wood floor. Jual's rod design ensures a very stable support that will improve the performance of all AV products. The highly polished glass shelving is manufactured with round edging, providing extra safety

Glass is toughened to British Safety Standard: BS6206. Shelf weight limits: Top shelf 85Kg, each subsequent shelf can hold 65Kg

Jual Medium Size Corner TV Stand - JF004

Tue, 30 Nov 1999 00:00:00 +0000

Another fantastic stand from Jual Furnishings and this one is great for up to 37" LCD or Plasmas where side speakers may be more suited to this model. It's striking lines and highly machined glass edging gives this support its clean modern look. Jual's rigid design ensures a very stable support that will improve the performance of both video and audio products

With matching feet to provide good stability on all floor surfaces. ENCLOSED CABLE MANAGEMENT SYSTEM. Glass is toughened to British Safety Standard: BS6206

Available in Silver with clear shelves or Black with Black shelves - see Image Gallery for more pictures

Philex 6 Way "Surge & Spike" Protector

Tue, 30 Nov 1999 00:00:00 +0000

Power surges and lightning strikes can damage or reduce the life of home entertainment and other electronic equipment. Did you know simply switching appliances on and off can create potentially harmful electrical imbalances? The Philex Surge Protector is your premiere solution for clean, safe power and the industry's best in construction, ratings, and safety standards. Protect your new Plasma and LCD TV (and other accessories) with this product from Philex.

Buy any TV Bracket and you can add this to your order for only £3.49!!

Polaris Universal Projector Mount (Mag-EXT)

Tue, 30 Nov 1999 00:00:00 +0000

The Polaris Universal Projector Mount fits most projectors that weigh less than 5Kgs. Four Universal Spider arms allow flexible positioning to reach any mounting point. Patented MagnaGuide technology makes installation a snap: a locking magnet allows for easy access to make adjustments, replace bulbs, etc. Lock-It security hardware is standard at every point for a safe and secure installation. Best of all, the Polaris is backed by Premier Mounts industry-leading Lifetime Guarantee.

Nova-EXT Projector Mount

Tue, 30 Nov 1999 00:00:00 +0000

If you're looking for a Projector Mount that gives you both speed and style, the Nova Universal Projector Mount is your perfect solution. This mount comes with an 11" - 15" adjustable tubular extension for applications that need the extra flexibility without having to sacrifice cable management. Featuring a smooth shape and SpiroLock^TM technology, the Nova EXT Universal Projector Mount lets you secure most projectors up to 29Kgss in record time!

Note: You can use the mount without the extension pole if you prefer to fit this "near flush" to the ceiling.

Vogels EPC 6545 Projector Ceiling Mount

Tue, 30 Nov 1999 00:00:00 +0000

The EPC 6545 Ceiling Solution from Vogel lets you mount your projector to the ceiling. You can easily position your projector and secure it to maintain a stable image while viewing. It comes with the universal EPA 6505 Projector Connector that fits virtually every projector weighing up to 10 kg. Due to the Easy Connect feature, the EPT 6525 is part of the Vogel's Click & Switch system.

Now you can easily project an image on any screen or wall. The unique spherical hinge joint has a huge range of movement so you can position your projector wherever you desire. With the Adjust & Secure feature you can lock the projector into position. You can easily conceal your cables with the patented CIS® Cable Inlay System. When not in use, simply remove your projector and hide the cables and support from sight using the ceiling cover provided.

The EPC 6545 is a complete Ceiling Solution that comes with the EPA 6505 Projector Connector and the EPC 6540 Ceiling Module.

Universal Projector Ceiling Mount - 16-24cm Drop (PM3)

Tue, 30 Nov 1999 00:00:00 +0000

The PM3 Ceilimng Mount is a European Manufactured, top quality universal projector ceiling mount with three mounting points. Its design provides ultimate flexibility and optimal positioning of your projector for maximum comfort.

It can take up to projectors with a maximum distance between the mounting points of 380mm and the mounting distance to the ceiling can be set between 243mm and 160mm.

The PM3 is ideal for applications where a flexible mounting solution is needed e.g.:

- Homes
- Offices
- Classrooms
- Conference rooms
- Public Utility places

A cardan joint offers multiple options to adjust the projector optimal to the screen.

At a glance:

Flexible mounting solution
Extension of 243 - 160mm
Height adjustable
4 Pivot Points, cardan joint
Maximum Tilt of 30°
Flexible Solution for mounting
Easy and stable mounting to the ceiling
10 years warranty

Universal Projector Ceiling Mount - 39-64cm Drop

Tue, 30 Nov 1999 00:00:00 +0000

The PM2 Projector Mount from Edbak is a universal, height adjustable projector ceiling mount with three mounting points. Its design provides ultimate flexibility and optimal positioning of your projector for maximum comfort.

It will handle projectors with a maximum distance between the mounting points of 500mm and a minimum distance between the mounting points of 40mm.

It provides flexible adjustment with a maximum distance to the ceiling of 640mm and a minimum distance of 390mm.

Therefore, PM1 is the best solutions for applications like:

- Classrooms
- Conference rooms
- Offices etc.

A cardan joint provides flexible possibilities to adjust the projector optimal to the screen. European Manufactuered and with a lifetime warranty

At a glance:

Enables tilt and swivel
Comfortable positioning of your TV set for the most adequate viewing angle
Easy and stable mounting on a wall surface
Solid and durable steel construction, powder coated
Improve ergonomics and comfort at home especially in places with only a little space
10 years warranty

In Wall Mounting Box for AM2 Bracket (AM200)

Tue, 30 Nov 1999 00:00:00 +0000

If you want a truely flush look for you TV but need the flexibility to pull the TV out then these "In-Wall Boxes" from Premier Mounts for their AM2 Bracket willl do the job for you. Simply drop into your plasterboard wall recess or know out space into your wall and fit this "in-wall" box.

Recess mount for AM2 Swingout Arms

Cable routing through knockouts

Drop-in power / signal box for easy wiring

Frame allows for a finished look

Lifetime Guarantee

In-Wall Mounting Box for AM250 & AM3 (AM325)

Tue, 30 Nov 1999 00:00:00 +0000

The INW-AM325 in-wall box is designed to house either the AM250 or AM3 Universal swingout Arms.

The INW-AM325 safely supports the mounting arm and comes with multiple knockouts for power and signal. An optional box for external power and signal is included. Use the AM250 for 37”-50” displays or the AM3 for 40”-61”
displays. No mount assembly required.

View Data Sheet

View Installation Instructions

Premier Mounts Trolley with Rotating Mount (BW60-RTM)

Tue, 30 Nov 1999 00:00:00 +0000

NEW Product from Premier Mounts - this Trolley with flexible mounting stand allows you to rotate your LCD/PLASMA TV through 360 Degrees. Its also "nests" so if you've got more than one they can be pushed together a bit like shopping trolleys.

The unit is 170cm High. Suits LCD/Plasma screens 32-61". Supports up to 73kg. Includes heavy duty, lockable castors and it has cable management.

This stand consists of:

Base with a depth of only 70.58cm
152 cm (60") Polished Chrome Poles x 2.
Plasma Mounting Plate for 32" to 61" screens, rotates 360 degrees.
4 x castors (2 x braked, 2 x non braked)

OPTIONAL Accessories - PSD-PS Glass Shelf to hold your DVD, Digibox etc.

Swingout Arm for 40"-61" Screens (AM3) + V200 Kit

Tue, 30 Nov 1999 00:00:00 +0000

Available in BLACK or SILVER this Superior Turn/Tilt Bracket with Lifetime Guarantee from Premier Mounts. Ideal for Plasma/LCD wall mount for screens from 40" - 61" and up to 73kg. Fixings and a Spirit Level are included. Includes V200 KIT which is needed for a small number of TV's - check details of your TV or call us for advice.

This is Premier Mounts "top of the range" Bracket. The arm is only 4" from the wall when closed and extends to 26" from the wall. It also gives a +- 10 degree tilt. Includes a neat little spirit level to assist your in getting the installation spot on!

Will it fit my TV? - Call us (Mon-Fri) and we can advise before you buy if you're not sure. Ideal for all large screen models from Samsung, Sony, Toshiba, Pioneer, Philips, Panasonic, LG, NEC, Hitachi and many others.

Price Match Promise - we think this is the cheapest price for an AM3 in th UK - if you find it cheaper just call us and we'll beat it!

Click here to view the installation DataSheet

Click here to view the Installation Details

Click here to view the Technical Specification Details and Drawings

TVFixings.co.uk - TV Brackets

B-Tech Viewlogic Plus + (Up to 42") LCD Screen Wall Mount - BT7535

B-Tech Viewlogic Plus + (Up to 32") LCD Screen Wall Mount - BT7514

B-Tech LCD Screen Wall Mount with Articulated Arm - BT7513

B-Tech LCD TV "Low Profile" Wall Mount - BT7532

B-Tech AV Component Shelf - BT7077

B-Tech AV Component Glass Shelf - BT7087

HDF100-1 - Pull out Tilt & Turn Arm for 12"-23" Screens

HDF-200 Black Tilt/Turn LCD Bracket

HDF-100 Black Tilt/Turn Bracket

HDN-200 Flat on the Wall LCD TV Bracket

HDN-100 Flat on the Wall Mount

Pull out Tilt & Turn Wall Mount (MA2740)

FREE Gold Plated HDMI coaxial cable - 2m

Meliconi Ghost 430 Tilt and Turn Arm for 32" - 50" Screens

Meliconi Ghost 420 Tilt and Turn Bracket for 32"-50" Screens

Meliconi Ghost 230 Tilt and Turn Universal Bracket

Meliconi Ghost 220 Tilt and Turn Bracket for 19"- 40" Screens

Meliconi Flat Vision Star 200 for 32" - 60" Screens

Falcon Black Glass Wall Plasma Stand

Black Square Glass and Metal Flat Panel Stand

Black Round Glass and Metal Flat Panel Stand

Metal, AC Voltage and Stud Detector

Pull out Tilt&Turn Bracket for 37-50" Screens

Pull Out Tilt & Turn Bracket for 23-37" Screens

Select Mounts Tilting TV Wall Bracket for 17"- 37" Screens

OneClean DuoPack (Screen & Keyboard)

Thor HD TV Connection Kit

LabGear HDMI Cables - "24k Gold Plated"

OneClean Screen cleaner AM 85146

Vogel's EMO TriMotor Motorised Bracket

Swingout TV Arm (SOAD) with Universal Adapter (BT7505)

AM2 + BT7505 Bundle - Pull out Tilt/Turn TV Bracket PLUS Universal Adapter

Vogel's Professional PFW3240 - Adjustable Bracket

B-Tech Mobile LCD/ Plasma Trolley - BT8004

Premier 360 Degree Universal Rotational TV Mount - RFM

Vogels EPW 6565 Projector Wall Solution

HDMI Switch with Remote Control

BLACK Wall Mount for 37"-63" Screens - XUT3763B

BLACK Tiliting TV Wall Mount for 26"-37" Screens

Flush Fit TV Bracket for 26-37" Screens - XUF2637B

BLACK Flush Fit TV Bracket for 37-63" Screens

BELKIN - Cable/SCART FLAT VIDEO CABLE 8ft

B-Tech Aluminium Cable Cover (BT7070)

Vogels EFW 2001 Flat on the Wall TV Mount

Spectral Panel PL152

Spectral Panel PL151 Stand

Spectral Panel PL161 Plasma Stand

Spectral Panel PL150

Spectral Curve QX100

Scart Lead Individually Screened with Gold-Plated Contacts

HDMI White Wall Plate

Gold Standard HDMI Cable - 1.8m

AviLock Motion Sensitive Alarmed Cable Lock

B-Tech Tiliting Bracket - Screen to 32" (BT7522)

B-Tech Flat TV Mount for Screen up to 32" - BT7521

B-Tech Flat Fitting TV Bracket for up to 32" - BT8421

B-Tech Flat Fit TV Bracket for Screens to 60" - BT8422

GD02 LCD/TFT Swing Arm Wall Mount - Silver

Vogels DVDock - LCD Headrest support

Cover Pack for Premier Mounts Stands/Trolleys (CPA)

Stackable TV Trolley for Screens 37-61" (BW60UFA)

Glass Shelf for Premier Mounts Stands (PSD-SHV)

Set of 4 Castors (2x brake, 2x non-brake)

Single Pole LCD Floor Pole for Screens 10-40" (B60-PRT)

Heavy Duty Ceiling Mount for 32-61" Screens (MS2S)

Heavy Duty Ceiling Mount for 10-50" Screens (PRT)

Ceiling/Projector Mount (NovaPro Version)

Premier Mounts Universal Table Top Stand for 32-50" (PSD-TTS)

Ultra-Flat TV Bracket for up to 40" Screens (PRF-220)

Flip Down (Under Cabinet) Bracket - up to 18" Screens

Flat on Wall TV Bracket for up to 30" Screens: XUF-1330L

Adjustable Height Ceiling Mount (CM2)

Alphason AG94/2-B Plasma Stand for Screens to 43"

Alphason Apex Plasma Stand for Screen up to 50"

Jual Large Glass TV Stand - JF002

Jual Glass TV Stand - JF003

Beech TV Stand for Screens up to 28" (JF010)

Jual Medium Size Corner TV Stand - JF004

Philex 6 Way "Surge & Spike" Protector

OneClean Screen cleaner AM 85146

Vogel's EMO TriMotor Motorised Bracket

Vogels DVDock - LCD Headrest support